The
fastening field of rivet nuts, pull caps and instant pull caps are widely used
in the assembly of electromechanical and light industrial products such as
automobiles, aviation, instruments, furniture and decoration. It is developed to
solve the problems of metal sheet and thin pipe welding nuts that are easy to
melt and internal thread tapping is easy to slip. It does not need to tap
internal threads, does not need to weld nuts, and has high efficiency of
riveting and convenient use. What is the purpose and usage of rivet nut?
Use of
rivet nut
The
national standard number of rivet nuts is GB/T 17880.4-1999. Rivet nuts, pull
caps, and instant pull caps are widely used in the field of fastening, and are
now widely used in the assembly of electromechanical and light industrial
products such as automobiles, aviation, instruments, furniture, and decoration.
It is developed to solve the problems of metal sheet and thin pipe welding nuts
that are easy to melt and internal thread tapping is easy to slip. It does not
need to tap internal threads, does not need to weld nuts, and has high
efficiency of riveting and convenient use.
Usage of
rivet nut
1. First,
check whether the gun nozzle screw is correctly assembled, select the
corresponding gun head and rivet bolt according to the dimension of rivet nut,
and check whether the connecting parts are firmly connected.
2. Pay
attention to the deformation length or displacement of the riveted nut, and
then correctly adjust the angle of the operating lever.
3. The
scale ring of the rivet nut gun is used to adjust the rivet stroke, which can
be adjusted as required during operation. It is worth noting that when
adjusting the length of the rivet bolt, it is necessary to open two handles and
adjust the gun head sleeve, so that the exposed length of the rivet bolt is
slightly greater than the length of the rivet nut. Finally, tighten the
adjusting nut and the gun body together.
4.
Finally, open both hands to pull out all the bakelite, put the corresponding
rivet nut on the end of the rivet bolt and hold it firmly, push the bakelite to
screw the gun head bolt, then pierce the rivet nut into the pre drilled hole of
the rivet piece, and then press the two handles together. At this moment, the
rivet nut expands to rivet the workpiece tightly, and then pull out the glue
ball, and the rivet bolt exits from the threaded hole. The device for
completing the rivet nut.
Summary:
Rivet nuts are widely used in automobile, aviation, instrument, furniture,
decoration and other equipment. In addition, we need to remind you that when
using rivet nuts, you must also operate accurately to ensure the use effect.
|